Toll Free 877.245.6247

Custom Calibrated Pressure Sensors

Clippard CPS series pressure sensors are conditioned and offer a customized calibration around your application requirements, allowing for a full scale accuracy of 0.25% over the calibrated range. They can be used in conjunction with Clippard's Cordis Pressure Controller or as a standalone transducer.

Cordis CPS Series Custom Calibrated Pressure Transducers

CPS Pressure Sensor Benefits:

  • Standalone or use in conjunction with Cordis Pressure Controls
  • Downstream sensor feedback
  • Multiple VDC signal outputs
  • Static or dynamic applications
  • Multiple electrical connection options
  • Customizable pressure ranges and mounting options
  • IP65 Protection Rating





Mounting options available are Male 1/8" NPT, Male 1/8" BSPT, 7/16-20 UNF face seal and manifold mount. These allow the user to place the sensor downstream or in a remote location from the pressure controller. This creates a quicker response and helps avoid any lag in the system.

The manifold mount lends itself well to analytical value-added assemblies. All wetted materials are oxygen compatible and manifold mounting eliminates any possible contamination during assembly.

 

 

 

 

 


Medium   Clean, dry, non-corrosive gases  

Material, Wetted   Sensor:  Polyamide
Body: Aluminum
O-Rings: FKM
Fitting: ENP Brass
Manifold: Ultem

Calibrated Pressure Range   Vac to 150 psig

Typical Response Time   <5 ms

Accuracy   ±0.25% of Full Scale

Linearity   ±0.25% BFSL

Port Size   Male 1/8" NPT, 7/16-20 UNF, Male 1/8" BSPT or Manifold

Operating Temperature   32 to 158˚F

Mounting Attitude   Any

Voltage   12 to 24 VDC

Current Draw   <20 mA

Protection Rating   IP65

Signal Output   0 to 5, 0 to 10, or 0.5 to 4.5 VDC