be_ixf;ym_202001 d_17; ct_100
Toll Free 877.245.6247

Clippard Cartridge Valve Bore Drawing & Dimensions

Clippard Miniature Cartridge Valves

Clippard miniature cartridge valves offer the user flexibility in the application of 2-way and 3-way Normally-Open or Normally-Closed valves.

Clippard Gasket & Sealant Tips

Gaskets are recommended for use with Clippard fittings. They provide snug, dependable seals without extra effort or materials. The most popular gasket for static sealing of #10-32 threads is the 11761-2 Nitrile Gasket. This gasket is included with packaged fittings and comes installed on a variety of Minimatic® slip-on fittings. Overtightening fittings with gaskets may have a tendency to extrude the gasket. While this may be a concern, the actual sealing is being accomplished by a small piece of the gasket at the base of the threads.

Clippard Push Quick Fittings Installation & Removal Instructions

Installation of Tubing or Hose into fitting
1. Slowly push a clean and perpendicularly cut tubing into the fitting until it comes to a dead stop.
2. Pull the tubing back gently until the Gripper Ring of the fitting grips onto the tubing and has a good seal.

Clippard Single-Barb Pneumatic Fittings


Clippard Single-Barb Fittings

• Allow for easier assembly onto tubing
• Provide less leakage potential and increased pressure performance
• Reduce the need to constantly tighten the assembly
• Provide a single sharp edge allowing the barb to catch onto the tubing for a leak-free connection
• Require less clamp pressure

Tips on Using Hose Barb Fittings


Hose or Tubing Size.  The use of different sizes of hose or tubing in your circuits deserves some care and consideration. In general, follow the manufacturer’s guide for the size of hose or tubing you use. For air logic circuits, we recommend 1/16” ID for pilots and 1/8” ID for supplies and outputs.