DVP Proportional Valves

Configure DVP

The DVP Series proportional solenoid valves are precision-built 2-way control valves, utilizing a unique, patented valving principle. They offer an extremely high cycle life, fast response, linear flow gain, low hysteresis, low power consumption, and flows over 60 l/min. The valve provides air or gas flow control, and varies the output flow based on the current input to the solenoid.
(Please select a valid configuration)

  • Industry standard for leak-free operation
  • Over 1,000,000,000 cycles
  • Extremely low hysteresis
  • Fast response time
  • Large flows in a small, sleek design
  • Low heat rise/low power
  • Robust stainless steel "spider" flat armature spring
  • CE, RoHS compliant
  • Proudly Made in USA

  • 2D FileFile
    Air Flow45.5 l/min
    Coil Resistance (72° F)52.6 ohms
    Cycle LifeOver 1,000,000,000 Cycles
    Data SheetValve Data Sheet, Driver Data Sheet (optional)
    Filtration40 micron (recommended)
    Function2-Way Normally-Closed Proportional
    Input Current Range0 to 0.190 amps
    ManifoldsSingle:15490-5 Double:15781-2 4-Station:15781-4
    Material, BodyStainless Steel
    Material, SealsFKM (Std.)
    Material, SeatStainless Steel
    Material, Wetted304 Stainless Steel, PPS FKM (Std.)
    Maximum Voltage Required13 VDC
    MediumAir & Compatible Gases
    MountManifold with #10-32 Male Stud
    NoteCE, RoHS & REACH Compliant
    Number of Ports2
    Operating Temperature Range32 to 120°F (0 to 49°C)
    Port, InletManifold Stud
    Port, OutletManifold Outlet Hole
    Voltage (72° F)10 VDC
    Wattage1.9 watts at 72°F (22°C), 2.5 watts max