Home › Products › Electronic Valves › Configure ES-*
ES Series Electronic Valves

Configure ES-*

The ES series features large cross sectional o-rings, minimal leak points, and proven poppet designs. All mounting hardware is outside of the flow path for the ES, and no internal parts are threaded during assembly to reduce the possibility of contamination. The ES has the best performance-to-price ratio for low leak valves.
(Please select a valid configuration)

  • Over 1 billion cycles (under ideal conditions)
  • 0.01 atm sccm leak rate
  • No threads in flow path
  • Fast response - 5 to 10 ms (nominal)
  • Close mounting - 7/8” on center, overall height less than 1”
  • Ideal for ultra-low leak applications

    Clippard ES Series Valve Flow Chart

    Cutaway Diagram of Clippard ES Series Valve

    • 2D FilesValves, Manifolds
    AccessoriesWire Lead Connector, 18" C3-RXB18; Cover Plate for Unused Manifold Station ESM-CP; Manifolds: Single, Side Port 26090-1, Single, Bottom Port 26090-2, Double-Station 26090-3
    Coil Resistance144 Ω
    ConnectionTop Terminal Pin
    Current0.083 Amp
    Data SheetData Sheet
    Function2-Way Bi-Directional
    Material, BodyENP Carbon Steel, Nickel Iron Alloy, 300 Series Stainless Steel
    Material, SealsNitrile
    Max. psig105 psig
    MediumClean, Dry Air and Compatible Gases (40 micron filter recommended)
    MountManifold
    Operating Temperature Range32 to 150°F (0 to 66°C)
    Response Time5 to 10 ms (nominal)
    Voltage12 VDC
    Voltage Tolerance90 to 120% of Rated Voltage
    Wattage1 Watt at Rated Voltage
    Weight0.0850
    Wire ConnectorTE Connectivity #5-103956-2

    Knowledge Base

    Product Information

    Troubleshooting

    Videos