Search
Search results
-
The Building Blocks of Air Circuits
... lines between the valves and actuators. Piping between the valve and actuator should be as short as possible and of the minimum diameter ... is that all the air in the pipes between the actuator and valve is wasted every cycle. These runs must be filled to make the device move, ...
-
Air Logic Upgrades Composites Manufacturing
... motor uses line-pressure pilot valves, which shift a 4-way valve spool to reverse the pump. Keys for fast pump reversal are a light ... load on the pilots and large exhaust ports on the 4-way valve. Also, the air cylinder has a 2-in. stroke to minimize the volume of ...
-
Pneumatic Solutions for Ride Control
... the ride is concerned—the easily accessible ride control valve enables the passenger to adjust the amount of air/ how fast the air can ... manifold, four cartridge stem valves, a ride control valve, mufflers, knobs, and a pressure gauge. ...
-
Clippard Modules Control Battery Filling at Simplex
... solution becomes too acid, it turns bright red and a check valve in the jar prevents the solution from backing up into the pump. Also, ... system because of its reliability, simplicity and ease of valve replacement. Our maintenance has been kept to a minimum since we became ...
-
Clippard Controls Breathe Life into Astroworld Hippos
... The circuit was designed, and refined, and consisted of a 12 valve Clippard module panel. (Later, two additional hippos were added and the ... maintain and easier to adjust when necessary. The modular valve approach offers us maximum versatility, less components to worry about ...
-
Laboratory Automation for Pesticide Residue Analysis
... Engineer at Teledyne Tekmar, the choice was clear. "The air valve actuates, then the cylinder moves. As opposed to using a motor to drive a ... an added benefit was the flexibility of having the same valve throughout the machine, thereby simplifying the need for inventory. In ...
-
History: 1950s
... devices. All they had at the time was a cylinder, a valve, and a few fittings they'd used for their own purposes. Early dealers ... Buck designed what is now known as the MAV-4, a 4-Way valve that he modeled after valves used for steam engine trains. The MAV-4 ...
-
Singer ICN Tufting Machine Produces Intricate Pattern Carpet; Saves Valuable Yarn
... device, the new “Mouse” Electronic/Pneumatic Interface Valve. Controlled needle tufting is not new, but never before has the ...
-
How a Basic Leak Decay Tester Works
... Using a 3/2 and a 2/2, also known as a 3-way and a 2-way valve, in series can isolate the pressure in a volume. This simple two-valve circuit, when used in conjunction with a pressure sensor, can be a basic ...
-
EFB Fill & Bleed Electronic Circuits
... A Fill and Bleed Circuit is a combination of pneumatic valve components used to inflate a volume or apparatus in one controllable ...
