be_ixf;ym_202405 d_02; ct_50

Search

Search results

  1. Clippard J-Series Sleeve Valves

    ... 2-way and 3-way valves, and no cross-over between inlet and exhaust on the 3-way models. The JSLV-2 2-way valve and the JSLV-3 3-way valve combine high flow with small size. Unlike ball ...

  2. An Alternative to a 2-Way, Normally-Open Valve

    ... One alternative is using a 3-way, fully ported electronic valve. In this video, learn how to plumb a 3-way, fully ported valve for 2-way, ... By using the top port—which is commonly referred to as the exhaust—as the inlet, and the normal outlet as the outlet, and blocking the ...

  3. How to Avoid Electrical Hazards with Air Logic

    ... because control lines longer than 10 to 15 ft fill and exhaust slowly compared to near-instantaneous electrical signals. In addition, ... uses line-pressure pilot valves, which shift a four-way valve spool to reverse the pump. Keys for quickly reversing the pump are a ...

  4. Cordis CPC Electronic Pressure Controller Troubleshooting Guide

    ... These scenarios are dependent on downstream volumes and valve orifice size. Suggested PID increments per valve size can be found ... command, and when exhausting to 0% of command, may close the exhaust valve before venting off all of the pressure. -  Increase ...

  5. Clippard Push-Quick In-Line Flow Control Valves

    ... versions, intake air flows freely through the flow control; exhaust air is metered out through an adjustment screw. With the meter-in ... and fast response •  Complete rotation of the valve body around the bolt    allows for optimum positioning ...

  6. Simplified Pneumatic Symbols

    ... portion of any air logic circuit. Complete directional valve symbols are created by combining the appropriate actuator and valve ...   2. Symbols do not show exhaust flow paths.  Nearly all air logic circuit components exhaust ...

  7. Clippard PQ Flow Controls Series

    ... when mounting directly to an NPT port on a cylinder or valve is required. In the meter-out versions, intake air flows freely through the flow control; exhaust air is metered out through an adjustment screw. With the meter-in ...

  8. How Do Pilot-Operated Check Valves Work?

    ... air flow stops, the poppet check the trapped air. When the valve is piloted, the trapped air is allowed to flow back out of the control ... pilot-operated check valve and pilot it open to allow the exhaust to flow out of the cylinder. Two meter out flow controls control the ...

  9. Air Logic Upgrades Composites Manufacturing

    ... motor uses line-pressure pilot valves, which shift a 4-way valve spool to reverse the pump.  Keys for fast pump reversal are a light spring load on the pilots and large exhaust ports on the 4-way valve.  Also, the air cylinder has a 2-in. stroke ...

  10. How to Design Efficient Pneumatic Systems

    ... subplates. For instance, compared with discrete air-valve control systems, a modular system provides: • Proven, reliable ... it creates a backpressure behind the piston. Restricting exhaust air at the control valve further increases pressure and slows return of ...

Pages