Search

Search results

1. Clippard Releases NPV Dual-Tube 3-Way Miniature Pinch Valves

   ... devices designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may ... blood and particulate matter  • Unobstructed flow path  • Variety of medical/laboratory and food grade ...

2. Case Study: Liquid Level Sensing

   ... for easy inspection of the set point. Cordova Flow Controls, Greely, Colorado, describes the VA-1164 as a standalone ... challenge is to keep the tank level allowing for continuous flow of gas, which also brings some water and oil from the source. One ...

3. Products That Provide Proportional Control of Vacuum

   ... of an orifice I create. So I’m able to vary the amount of flow I let into the chamber or let out of the chamber. We also offer our ... vacuum very well. The Eclipse , being designed with low-flow applications in mind, utilizes a ceramic material as the wetted parts. And ...

4. Special Materials for Demanding Applications

   ... chemical compatibility. For example, a valve controlling the flow of acetone will have a short life if equipped with standard nitrile seals. ... cleanliness, convenience, and a completely unobstructed flow path. For help selecting the best materials for your application, call ...

5. Air Logic Upgrades Composites Manufacturing

   ... Although it’s possible to use PLC-based controls with flow meters, because the resins are flammable that would require ... ensure very uniform material delivery at both high and low flow rates, says DeLuca. By changing to a larger air motor and ...

6. Eclipse 2-Way Proportional Isolation Valves FAQ

   ... is the number of steps from the motor hard-stop to initial flow, or the offset distance. A hard-stop can be reached on either end of the ... B) as the supply. Please note there are slightly different flow characteristics depending on which way the valve is operated. Contact ...

7. The Many Faces of Manufacturing Efficiency

   ... said Coshnitzke.“We did batch, and then we did flow. We saw a 300-percent improvement with flow. Everyone was involved, so we have the buy-in to switch from bath to ...

8. The Building Blocks of Air Circuits

   ... a few of the limitations that can restrict compressed air flow. Other problems, such as using tapered pipe threads or lines with thin ... possible and of the minimum diameter to carry the required flow. The reason for this is that all the air in the pipes between the actuator ...

9. How to Avoid Electrical Hazards with Air Logic

   ... drive, help ensure uniform material delivery at high and low flow rates, says DeLuca. Air logic minimizes fire and ... control outside sources were upsized to allow for more flow so that we could use longer trigger lines outside the box,” he says. ...

10. Clippard Maximatic® Line of Valves & FRLs Press Release

    ... with port sizes from #10-32 to 1” with standard or high flow rates.  Several variations are offered that include stacking ...

Pages