Search

Search results

1. The Logical Choice for Factory Automation

   ... (When fuel reaches a small tube inside the nozzle, air flow through the tube is blocked, which trips a mechanism that shuts of the ... NOT2 . But because valve NOT2 has closed, it blocks air flow from the AND valve. The same results occur if PB2 is ...

2. Clippard J-Series Sleeve Valves

   ... sleeve valves with 1/8" NPT and 1/4" NPT ports offer large flow capability with a relatively short stroke in 2-way and 3-way valves, and ... JSLV-2 2-way valve and the JSLV-3 3-way valve combine high flow with small size. Unlike ball valves, sleeve valves require no space for a ...

3. An Alternative to a 2-Way, Normally-Open Valve

   ... For example, a normally-open valve allows for a flow path, but a normally-open electrical contact does not allow current to flow. I have submitted a request to the electrical industry to amend their ...

4. Clippard SCPV Cartridge & Manifold Configurations

   ... most robust and powerful linear actuator, the high-flow stepper-controlled proportional valves outperform the competition in ... and industrial automation requiring high resolution, high flow, and low hysteresis. In addition, the unique design allows for custom flow ...

5. Clippard Needle Valves Keep Plants & Vegetables Moist

   ... uses the internal parts of Clippard’s MNV-4K  Flow Controls to control the flow of water into a miniature sprayer creating a fine mist. The MNV-4 ...

6. Clippard Maximatic® Air Pilot Valves Selection Chart

   ... Exhaust Function Cv Flow @ 100 psig Closed Center Exhaust ... Exhaust Function Cv Flow @ 100 psig Closed Center Exhaust ...

7. 3D Printing (Positive Pressure)

   ... compressed air above the print fluid, then the rate of flow is varied and controlled from Clippard's Eclipse to the print head. This process is under constant flow and therefore requires very stable and repeatable pressure control to ...

8. Media Isolation Valves for Commercial Inkjet Printing

   ... process, the valves release it and provide consistent flow to the print head. However, most traditional process valves have ... also made of PTFE—to close off the media from the flow orifice. The design has zero dead volume under the seal and can be flushed ...

9. An Overview of Leak Detection Testing

   ... by a leak rate, which is often given as a volumetric flow rate at a standard temperature and pressure (e.g. standard cubic ... and Pa-m3/s. According to the NIST website, any volumetric flow rate that includes "atm" also assumes that the standard temperature is ...

10. Clippard Releases New NPV Series Miniature Pinch Valves

    ... that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may ... blood and particulate matter •    Unobstructed flow path •    Each valve comes with 12” of silicone ...

Pages